Bosh Dishwasher Board Repair

Bosch dishwasher CPU

Cyclone season is here and that means more fried Bosh Boards in Bosch Dishwashers. After an electrical storm here on the Sunshine Coast, I usually get a couple of calls about Bosch Dishwashers no longer working.

A quick inspection reveals the primary side of the power supply on the control board has been fried, occasionally outputs are effected. See photo.


Replacement Bosch boards have a retail price of more than $400, even to trade they are over $300. So in many cases my customers are throwing out the dishwasher. Even with insurance, the excess is still over $500.

Many Bosh boards are repairable, however the components are hard to find, some not being available here in Australia. Until now, I have sourced the main components that fry in electrical surges. In cases where the PCB tracks are not damaged it is viable to repair the board.

This is what we are offering. If you find your Bosh dishwasher is not working after an electrical storm you have 3 choices.  1. Call the Tech and be prepared to pay $500 bucks to have him/her fit a new board.  2. Throw out the dishwasher and get a new one $700, only $500 if you have insurance. 3. Remove the old board and send me a photo of the damage. If it looks repairable send it to us. We will repair it and send it back for $100. If we can not fix it we will write a report for you $45.00 stating that its stuffed for insurance purposes.

Removing the board from a Bosch Dishwasher is simple. Unplug the dishwasher, slide it out. Remove the lid (see youtube) and the right hand side panel. You will find at the bottom the board enclosed in a white plastic case. Some models may differ. Photograph where the connections go as you will forget where they go back, yes you will.
Remove the board from the case and send us the photos at We want to see any obvious signs of damage, if the PCB tracks are sizzled, its too hard.

Now i hear you saying but what if its not the control board that fried, it could be just a fuse. Now there is a good idea, but Bosh have no power filters or fuses in between the Control Board and the main inlet, thats why the boards fry. It could be the secondary board thats effected, but its not likely. If a power surge is the cause then its likely the main board is effected. Usually damage is absolutely obvious. I usually find that there is no voltage at the power switch, thats a sure indication the power supply on the board is damaged.

Yes I will look at boards from other brands, but I may have to chase parts which slows the process down. If it takes longer than a week, nagging from the trouble and strife will probably mean you will buy a new one. Unless you do the dishes for the week.

bosh cpu